Windows

The error check THREAD_STUCK_IN_DEVICE_DRIVER has a value of 0x000000EA. This indicates that a wire in a device driver runs infinitely.

Dxgkrnl.sys is the Microsoft DirectX graphics kernel file. It works with your graphics card drivers and should not be modified under any circumstances.

This means that the device driver is looped and waiting for the hardware to react. This may indicate a bad card or defective drivers.

If you have recently received errors with dxgkrnl.sys, we recommend that you uninstall or reinstall all programs that caused this error. If this does not solve the problem, or if you have not recently installed a program, try restoring Windows to a previous copy. read more

The WDF_Violation blue screen error can be caused by missing, corrupted, or corrupted system files on your computer. To find out if this is the case, you should run Windows Recovery. There are two ways to fix potential problems with your system files: Repair and replace corrupted system files with Reimage.

Restart your computer and immediately press the F11 key several times until the “Select an option” screen appears.
Click Troubleshoot.
Click on more options.
Click Command Prompt.
At the command prompt, type C: and press Enter.

Note that your Windows blue screen code stops.
Try a specific fix for your blue screen error code.
Check the latest computer changes.
Check for Windows drivers and updates.
Perform a system restore.
Scan for malware.
Test your computer hardware.
Run an SFC scan. read more

This error means that something is wrong with your PC’s registry and you need to revert to the previous configuration. Turn off the computer by long pressing the power button, and then turn it back on. When you see your manufacturer’s logo, turn off your computer again. Repeat the process until Please wait is displayed.

. Bad System Config is a common Bug Check error on Windows systems, mostly caused by malfunctioning system and registry files or Boot Configuration Data (BCD) file. Some load commands in BCD files, or even some older ones, may conflict with newer, more stable files.

Many people could successfully upgrade to Windows 10, but there were also people who had problems with Windows updates. Here we look at the Bad_System_Config_Info error and how to fix it.

The Bad_System_Config_Info error appears on a blue screen in Windows 10 after upgrading from Windows 7. read more

Blue Screen of Death Error USBXHCI.SYS is something to do with the USB 3.0 or USB 3.1 ports on your motherboard. Or at least the driver that controls the Usb 3.0 specification port on the motherboard.

If the motherboard has the option in the bios for super speed or fast charge or standby charge of USB devices, try disabling the options in the bios as a temporary test.

A blue screen error (also called a stop error) can occur if your PC is unexpectedly shut down or restarted due to a problem. If this type of error occurs, you cannot see things like the Start menu or the taskbar on the screen when your PC is turned on. Instead, you may see a blue screen telling you that your PC has encountered a problem and needs to be restarted. read more

Click the Start button, then select Settings >> Updates & Security >> Troubleshoot. Select Blue the Screen Troubleshooter from the list and run it. Reboot your system after running the troubleshooting process.

On the keyboard, press the Windows logo key and S at the same time. Yes
Click on the UAC prompt.
Copy and paste the following command: netsh int ip reset c:\resetlog.txt.
Restart your computer after making changes.
See if tcpip is working.

Write down the Windows blue screen stop code.
Try a specific troubleshooting for the blue screen error code.
Check the latest computer changes. behind
Check for Windows updates and drivers.
Perform a system restore.
Scan for malware.
Test your computer hardware.
Run an SFC scan. read more

Run the Hardware and Peripheral Troubleshooter. Run the Image Deployment and Management Tool. Run System File Checker. Run a virus scan. Update your drivers. Uninstall the latest Windows updates. Perform a clean boot. Restore your system.

What is a dead critical process? Critical Process Dead The blue screen of death with error code 0x000000EF means that a critical system process on your computer has died. The process can be so critical that it can damage the hard drive, memory, or, in rare cases, even the processor.

The Windows 10 critical process stop code is easy to fix and the solutions can be various such as error etc.

You have encountered a rare thing – a blue death screen exclusive to Windows 8/10. BSoDs are historically very intimidating, but despite their name and appearance, most BSoDs are only temporary. This means that any errors you encounter can usually be corrected, although the process can be a bit painful. Earlier versions of Windows flashed around the error message needed to diagnose the incident with lines of code, but fortunately Windows 8/10 pushed the message into the background and you were kind enough to document it. read more

Use a dedicated third party recovery tool. Enable legacy advanced boot menu. Automatic update and fix drivers. Use the File System Checker and Memory Diagnostic tool. Update your computer. Scan your PC for viruses. Check your hard drive for errors. Start your computer in safe mode.

A kernel error usually occurs when the kernel detects data corruption. This can be caused by a USB issue, a corrupted driver or a device. Q: Is a kernel security check error fatal? The KERNEL_SECURITY_CHECK_FAILURE error is fatal because it mistakenly causes a blue screen of death.

Kernel security check failure is one of the stop codes you may encounter when your computer receives a Blue Screen of Death (BSOD) error. This stop code indicates that your computer is experiencing memory issues, virus infections, software conflicts, and driver compatibility issues. read more

Make sure your drivers are up to date by checking for the latest Windows updates. Click the Start button > Settings > Update & Security > Windows Update > Check for Updates. Then reboot your device. Make sure your device has the latest updates.

Fix #2: Install the latest updates
In some cases, making sure Windows has installed all the latest updates can resolve the IRQL NOT LESS OR EQUAL error. Make sure automatic updates are enabled. Windows Vista 7 users can type update in the search box to open Windows Update.

In fact, IRQL_NOT_LESS_OR_EQUAL (sometimes simply called “IRQL”) is usually a memory-related error that occurs when a system process or device driver tries to access memory at an address for which it does not have valid access rights. read more

How to fix Video TDR error. Solution 1 – Update or reinstall your graphics driver 2. Solution Optimize power management settings. Solution 3 – Clean the components Solution 4 – Replace atikmpaq Solutions for 5: Intel users.

Hold down the Windows key and press R.
Find a file named atikmpag.
Then, while holding down the Windows key, press R again.
Find a folder called ATI.
Once you find it, copy this file to your desktop.
While holding down the Windows key, press X.
In the black window, type chdir desktop and press Enter.

Actually atikmpag. The BSOD system error is caused by a faulty, incompatible, or outdated graphics driver on your computer. More precisely, atikmpag. The blue screen error is related to the AMD graphics card. read more

Update the device driver. Restore the network driver. Scan your computer for malware. Temporarily disable your antivirus program. Run an SFC scan. Run the DISM command. Check your hard drive for errors. Perform a system restore.

The reason for ndis. The sys blue screen error is not exactly known, but the problem can occur due to corrupted files, misconfigured device drivers, malware, faulty drivers, a corrupted missing Windows registry, system files, or corrupted system files.

Go to Settings > Update & Security > Windows Update and apply any pending updates if they contain a fix. It’s also important to check your drivers as they can often be the source of Windows 10 blue screens. To do this, press Win+X (or right-click the Start button) to open the Power User Menu. read more