Repair: File and Print sharing resource is online but isn’t responding to connection attempts

Updated May 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
  1. Download and install the repair tool here.
  2. Let it scan your computer.
  3. The tool will then repair your computer.

Windows users cannot access other Windows computers via Wifi & Ethernet.

Error Message – “file and print sharing resource is online but isn’t responding to connection attempts”.

You can follow the steps below to solve the problem:

1. Go to the control panel

Access Credential Manager on any Windows 7 machine on the network.

Under Windows credentials, enter the name of each computer, user name and password.

2. Activate NetBIOS via TCP/IP :

Go to Control Panel Network and Internet Network Connections.

Right-click on the connection and select Properties.

Click on “Internet Protocol (TCP/IP) Version 4” in the list.

May 2024 Update:

You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

Download Now

Click on Properties, then on Advanced.

In the Advanced TCP/IP Settings window, go to the WINS tab.

Under NetBIOS Settings, click “Enable NetBIOS over TCP/IP”, then click OK.

3. Check with the “netsh winsock reset” and “netsh int ip reset” commands.

Do you configure the desktop for file and printer sharing?

  • Hold WinKey + X and open the control panel in the icon display.
  • Click on the Network and Sharing Center.
  • Click Edit Advanced Sharing Settings in the upper left corner.
  • Expand the section entitled Private (current profile).
  • Select the radio button to enable file and printer sharing.
  • Select Save Changes below and confirm the UAC prompt if necessary.

Make sure that all computers are discoverable.

If you experience this problem on Windows 10 or Windows 8.1, make sure that all computers involved in the operation are set to Discoverable. Several users who encountered the resource “Sharing files and printers online but do not respond to connection attempts” reported that the problem was fully resolved after ensuring that the network discovery was properly configured.

Installing all pending Windows updates


If you see this error in the network diagnosis on a Windows 10 computer, you may be dealing with a known error that affects versions 1703 and earlier.

Microsoft would have quickly released a patch (through a Windows update) for this particular problem, but some concerned users report that the same behavior persists after the update has been installed.

To ensure that the patch is installed, you must install each pending Windows update.

So, above are the different ways and means to fix file and printer sharing errors. Executing the above instructions will certainly help you to resolve the file and the print sharing resource is online, but does not respond to the connection attempt error.

Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Scroll to Top