How to Troubleshoot “Driver Power State Failure” in Windows 10

By /



Updated December 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

  1. Download and install the repair tool here.
  2. Let it scan your computer.
  3. The tool will then repair your computer.

Driver Power Status Failure is a rare blue screen error that occurs when a driver goes to sleep mode while it is running. BSOD often occurs when the computer comes out of hibernation and Windows cannot wake up the device driver or the driver takes too long to respond.

The error can be fixed by making simple changes to the power settings, but some users may have to dig deeper to fix the problem. Here are some effective ways to fix the Driver Power State Failure error in Windows 10.

What causes the “Driver Power State Failure” message in Windows?

The “Driver Power State Failure” error (blue screen of death) is usually caused by a problem with the power management of a device connected to your PC. If the device goes into hibernation during use, or does not come out of hibernation when you try to use it, Windows considers it a critical error and displays a BSOD message.

There are several reasons why this might happen. If the device driver is outdated or malfunctioning, it can affect Windows’ ability to control the power settings of connected devices. Updating the drivers (or downgrading to the latest working driver) may solve the problem.

How to solve the “Driver Power Status Failure” problem in Windows?

December 2024 Update:

You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

Download Now

Remove the problem driver

  1. Boot your computer into safe mode if it does not boot normally.
  2. On your keyboard, press the Windows logo key and R at the same time to bring up the Run dialog box.
  3. Type devmgmt.MSC and click OK.
  4. Expand the category and find the device with the yellow exclamation mark.
  5. Right-click on the device and select Uninstall Device.
  6. Reboot the computer and check if Driver Power State Failure has been resolved.

Disable Power Save mode

  1. Boot your computer into safe mode if it does not boot normally.
  2. Press Win+R (the Windows logo key and the R key) on your keyboard at the same time to bring up the Run window.
  3. Enter Control Panel and press OK to open the Control Panel window.
  4. Navigate to the small icons and select Power Options.
  5. Make sure that Balanced (recommended) is selected, and click Change Schedule Options next to it.
  6. Click Change advanced power settings.
  7. Expand Wireless Adapter Settings and Power Save Mode and change the setting to Maximum Power Consumption.
  8. Expand PCI Express and Link State Power Management and change the setting to Maximum Power Saving.
  9. Click Apply and then OK.
  10. Reboot the computer and check if the driver power state failure is resolved.

Uninstalling third-party software

  1. Press the Windows logo key on your keyboard and type Control. Then click Control Panel.
  2. Select Uninstall software.
  3. Right-click the program you want to uninstall and select Uninstall.
  4. Reboot your computer to see if this solution worked.



Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Frequently Asked Questions

Driver Power State Failure is a driver-related error that occurs when the driver is out of date or incompatible with the system. The error can also occur in the case of a virus or malware.

  1. Open the Device Manager to diagnose the problem.
  2. Look for the yellow triangle.
  3. Right-click on the problematic device and select "Properties". The "Properties" window should have tabs at the top.
  4. Uninstall the driver if it is completely corrupted.

  1. Update the system drivers.
  2. Run the System File Checker system file integrity tool.
  3. Uninstall recently installed drivers.
  4. Disable hibernation or sleep mode.
  5. Keep Windows up to date.

If you're getting a Driver Power State Failure error on your Windows 10 device, it could indicate bad drivers, incompatible hardware, or, in some cases, improper power settings. Fortunately, fixing this error is pretty easy.

Related posts:
  1. How to Troubleshoot: MTP USB Device Driver Failed Error
  2. Extend laptop battery life; troubleshoot power problems with Power Troubleshooter
  3. Display Hibernation in the Power button options of Windows 8
  4. How to Fix Hyper-V Virtual Machine Stuck in Saved State
Scroll to Top