How to Fix BSOD Stop Error 0x0000009C

Updated November 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

Have you received any serious deaths of Windows 10/8/7 computer blue screen and a stop error message 0x0000009C MACHINE_CHECK_EXCEPTION that is displayed on the blue screen loop of your PC? Hardly known about such Blue Screen Stop Error Code 0x0000009C problems and that you also want the machine to repair / solve, check for BSOD exceptions problems without losing / deleting files from the computer’s hard disk? ALL RIGHTS. Make sure important computer files, movies, music and data are backed up elsewhere and follow this article to solve your blue screen problem.

The error message looks like this:

MACHINE_CHECK_EXCEPTION
STOP: 0x0000009C ( 0x0000000000000000, 0xFFFFF880009F8B70, 0x0000000000000000, 0x0000000000000000)

This error check indicates that a fatal exception has occurred in the machine control. This is a material problem: an unrecoverable material error has occurred. The parameters have different meanings depending on the type of CPU you have, but during diagnosis they rarely lead to a clear solution. It usually results from overheating, hardware failure (RAM, CPU, hardware bus, power supply, etc.) or hardware overload (e. g. CPU overclocking).

How to fix the error 0x0000009C MACHINE_CHECK_EXCEPTION:

Clear CMOS (reset BIOS)

Clear your CMOS (or load the optimized BIOS default values) to ensure that there are no incorrect BIOS settings. When you delete the CMOS from your motherboard, your BIOS settings are reset to the factory default values. The settings that the motherboard manufacturer has defined for most users are those that most users would use.

The easiest way to remove CMOS is to run the BIOS Configuration Utility and reset the BIOS settings to the factory default values.

The exact menu option in the BIOS of your motherboard may differ, but look for expressions such as Reset to Default, Factory Default, Delete BIOS, Load Setup Standards, etc. Each manufacturer seems to have its own formulation.

Run Memtest86+

MemTest86+ is a diagnostic tool designed to test RAM to detect errors. MemTest86+ will check this:

1. RAM accepts and stores random samples of the data sent to it.
2. There is no error when different parts of the memory try to interact.
3. There are no conflicts between memory addresses.

There are three ways to perform these tests. The first way is to simply download the ISO MemTest86+ file, burn it to a blank CD or DVD, then boot.

MemTest86+ is known to detect RAM errors in passes after the eighth pass. This is for information purposes only; if you think there is an obvious problem with RAM and 8 runs have shown no errors, you are invited to continue for longer.

Running 8 passes of MemTest86+ is a long and tedious exercise and the more RAM you have, the longer it will take. It is recommended to perform the MemTest86+ shortly before bedtime and leave it overnight.

Activate the driver verifier

Open Cortana and enter the tester. Select it to open it.
Click Create Custom Settings (for code developers), then click Next.
Check the following options and press Next:
I/O verification
Force pending I/O requests
IRP record
Enable the Select driver names from a list option and press Next.

https://www.dell.com/community/Windows-General/0x0000009C-MACHINE-CHECK-EXCEPTION-and-more/td-p/1443074


Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here