Updated September 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
- Download and install the repair tool here.
- Let it scan your computer.
- The tool will then repair your computer.
Internet Protocol version 6 (IPv6) is the latest version of the Internet Protocol (IP), which is intended to complement and possibly replace Internet Protocol version 4 (IPv4). Nevertheless, many Internet services still use the old protocol. All devices that use the Internet, such as computers or mobile phones, need an IP address to communicate with other devices on the network. The number of users of Internet services is increasing every day, which is why IPv6 was created (more IP addresses available if IPv4 is overloaded).
![](https://thewindowsbulletin.com/wp-content/uploads/2020/06/How-to-Fix-IPv6-No-Internet-Access-829x1024.png)
You may have stumbled upon “IPv6 connectivity”: No problem accessing the Internet” and cannot access the Internet. This notification usually indicates that your computer is unable to meet the requirements of Internet Protocol version 6 (IPv6) and establish a working Internet connection. The problem often occurs if your current network equipment is not capable of communicating using Internet Protocol version 6 (IPv6) – only some Internet Service Providers (ISPs) allow this, or if your router is configured to use Internet Protocol version 4 (IPv4) instead of IPv6.
Note that “IPv6 connectivity: no Internet access” may occur for a number of reasons, depending on various circumstances. To solve the problem, you may need to update network drivers, disable the IP Helper service, reset IPv6 settings, share and renew your IP configuration, etc. In the following guide, we describe different methods to troubleshoot “IPv6 connectivity”: Troubleshooting “No Internet Access” Problem
Causes of IPv6 Network Access Errors
When a device connects to the Internet, it receives one or more addresses on the network. Often a device receives both an IPv4 and an IPv6 address. IPv6 is a new network standard designed to allow a larger number of connected devices than the older, more widely used IPv4 protocol.
When properly configured, most devices work well when a network connection is established using at least one of these two protocols. Sometimes, however, a device connects and gets an IPv4 address instead of an IPv6 address. For example, when you look at the network connection details in Windows, your device may display a connection to an IPv4 network but show “No Internet Access” next to “IPv6 Connectivity”.
There are several reasons for this error. In most cases, the exact troubleshooting step that resolves the problem will reveal the cause.
Update your Network Drivers
![Update-Drivers](https://thewindowsbulletin.com/wp-content/uploads/2018/08/Update-Drivers.png)
The best way to update the drivers for your network is to go online to the manufacturer of your computer or device and download and install the drivers manually. For Dell users, you can download your drivers here. HP users can go here. You can also update your drivers over the Internet using the Device Manager. However, because your computer does not have an Internet connection, you can only use the first option.
September 2024 Update:
You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:
- Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
- Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
- Step 3 : Click “Repair All” to fix all issues.
- Dell users can go to the Dell support website here
- Click on “Support”, then on “Drivers and Downloads”.
- If you are visiting the site for the first time, you will see a screen to enter your service number. Otherwise, your browser’s cookies will show you the products you last visited. There are three ways to get your drivers. One is to use the service badge, the other is to automatically detect your system and the other is to manually search for your drivers. We will use the fastest method: the use of a service tag.
- Check the bottom of your laptop or the battery compartment. You should receive a sticker that says “Service Tag (S/N)”. Enter the 7-digit alphanumeric code on the support page of the Dell website and click “Submit”.
- Dell will then download the product associated with the service tag. From this page you can choose to automatically detect updates or find your drivers yourself. Click on the “Find It Yourself” tab.
- Expand the Network section and download your drivers. If the update does not run automatically, double-click it to run it. Follow the instructions to complete the installation and restart your PC.
Restart Winsock and the TCP/IP stack
![](https://thewindowsbulletin.com/wp-content/uploads/2019/08/Netsh-Winsock-Reset.jpg)
Winsock reset is an effective way to solve the problem of IPv6 Internet access. This method requires that you use a high command prompt. Here is a complete guide.
- Type the command prompt in the search box, then right-click it and select Run as Administrator from the submenu.
- At the high prompt, type netsh winsock reset catalog command and press Enter.
- Type the netsh int ipv6 reset reset.log command and press Enter.
- Reboot your computer and verify that the IPv6 no network access windows 10 error is resolved. If this method does not work, continue with the following solutions.
Disable the IP Helper Service
![](https://thewindowsbulletin.com/wp-content/uploads/2020/06/Disable-the-IP-Helper-service.jpg)
- Simultaneously press the Windows logo key + the R key to open the Run field.
- Type services.msc in the field and press Enter to open the Services window.
- Scroll down the Services window and right-click the IP Helper service. Then click Properties.
- In the drop-down list, set the startup type to “disabled”. Then click OK to save the setting.
- Now right-click again on the IP Helper service in the Services window. This time, select Stop.
- Close the Services window and see if the error has been fixed.
Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here
![](https://thewindowsbulletin.com/wp-content/uploads/2024/03/carter.jpg)