The Driver Detected a Controller Error Fix



Updated October 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
  1. Download and install the repair tool here.
  2. Let it scan your computer.
  3. The tool will then repair your computer.

Every time you plug your USB stick into your computer, you receive this error message over and over again. the driver has detected a control error on the hard disk drive device1\DR1 or DR3? Many users have reported this problem. But don’t worry, you can try the following solutions to solve it.

Can a large page file and not enough RAM cause this error?

The error message in the Event Viewer is something like this:

The driver detected a controller error on \Device\Harddisk1\DR3

Using disk management

Disk management has been improved in Windows 2000 and later operating systems. You can use disk management to display this information without using the registry editor. To find out where a particular hard drive is located in your system, do the following:

Start the Disk Management Console (diskmgmt.msc).

October 2024 Update:

You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

Download Now

Display the graphical view of your hard disks. Right-click on the grey area of the basic or dynamic drive whose drive number matches the hard disk number# in the error message.

Click on Properties. The properties contain Device Type information that tells you whether the disk is an IDE or SCSI, and also displays the Hardware Manufacturer name of the physical device and the Adapter Name to which it is attached.

Transfer your USB key to another port.

Some areas of your computer may be damaged and you can try to change the port of your USB stick. For some users, this has worked. If this doesn’t solve your problem “The driver has detected a controller error on the problem \Device\Harddisk1\DR1″”, then you should try again.

Updating the USB driver

Update-Drivers

Sometimes the USB port does not recognize the connected device and a system reboot is required to “find” the device.

Obsolete USB drivers can also be a problem and cause a high percentage of errors in USB operation. On a Windows system, you can update your driver by following these steps:

  1. Click on Start/System Control/System.
  2. Click on the Hardware tab, then click Device Manager.
  3. Click on Universal Serial Bus Controller.
  4. Click here to highlight and select the USB component you want to update.
  5. Right-click the highlighted selection and select Update Driver Software from the drop-down menu.
  6. Follow the instructions in the Driver Update Wizard to update the USB drivers.

I hope this will help you. If you have any questions or suggestions, please feel free to leave a comment.

https://superuser.com/questions/1082162/the-driver-detected-a-controller-error-on-device-harddisk1-dr3-which-disk-corr


Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Scroll to Top