System image recovery failure – Incorrect parameter (0x80070057) or due to BIOS/EFI



Updated October 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
  1. Download and install the repair tool here.
  2. Let it scan your computer.
  3. The tool will then repair your computer.

If you try to restore a Windows system image and the operation fails, you may receive an error message – The system image restoration failed. The cause could be mentioned:

The setting is incorrect (0x80070057)

or it could be specified as

(1)Windows cannot restore a system image on a computer with a different firmware. The system image was created on a computer with BIOS and this computer uses EFI(2)0x80070057

Sometimes you may prefer earlier versions of your system image settings, but it seems to be a bridge that you burned. An incompatible file system format or a corrupted image file could be the probable reason. Don’t worry, you can still get it back. Let’s try simpler ways that often help solve this problem.

System image recovery failed

(BIOS/UEFI error

October 2024 Update:

You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

Download Now

Now, if you created a system image on a computer with BIOS, it will not work on a system with UEFI. You can change the BIOS settings to create a new one that will help you next time.

You can also download and use the free AOMEI Backupper Standard. It can help you recover the system from a BIOS-based computer (MBR drive) to a UEFI-based computer (GPT drive) and vice versa. Try it to see if it suits you. Make sure that option Enable Universal Restore is selected when attempting to restore.

Error 0x80070057

If you see the error code 0x80070057, this suggestion may help.

Restart your Windows 10 computer to boot to advanced options, select Command Prompt and run the following commands in sequence:

diskpart
list disk
sel disk x
clean
exit

In the command sel disk, you must replace ‘x’ with the corresponding disk number on which the image will be restored.

Close Command Prompt and restart your device.

Now return to Advanced Options and select System Image Recovery and try recovering the system image and see if it helps.

Believe it works for you!



Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Related Video

Scroll to Top