Enable or disable DHCP for Ethernet or Wi-Fi on Windows 10/8/7



Updated October 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
  1. Download and install the repair tool here.
  2. Let it scan your computer.
  3. The tool will then repair your computer.

Internet Protocol (IP) Use Dynamic Host Configuration Protocol or DHCP as the standard network protocol because it is a secure and reliable configuration. It allows dynamic and transparent allocation of reusable IP addresses. If you have installed and configured a DHCP server on your network, all DHCP clients can retrieve the associated IP addresses and frame settings each time they start and join the network. This significantly reduces the time required to configure and reconfigure computers on a network.

However, problems can sometimes occur when connecting to the Internet. After trying all troubleshooting steps, an error message appears on the screen indicating that `DHCP is not enabled‘. If DHCP is not enabled on your Windows computer, this message shows you how to enable or disable DHCP for Ethernet, Wi-Fi or LAN connection on Windows 10.

Enable DHCP for Ethernet or Wi-Fi

October 2024 Update:

You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

Download Now

Open’Control Panel‘, enter’Network and Sharing Center‘ in the panel search field and press Enter.

Click on the link’Change Adapter Settings‘ visible under’Network and Sharing Center’. If you are using an Ethernet connection, right-click the option and select’Properties’. If you have a broadband connection enabled, select Wi-Fi and follow the steps above.

In the Ethernet/Wi-Fi Properties window, locate the input ‘Internet Protocol Version 4 (TCP/IPv4)‘ as shown in the following screenshot.

When this is done, the Internet Protocol Version 4 Properties window will appear; to enable DHCP, just check the radio counter boxes

  1. Automatically get the IP address – upper part of’ ‘General Screen’.
  2. Automatically obtain the DNS server address – lower part of the general screen.

Windows 10 can now retrieve the IP address of the DHCP server. To turn it off, turn these options off.

When you confirm whether DHCP is enabled or disabled, execute the following command in CMD:

ipconfig /alle

Here you see – DHCP Enabled … ; Yes/No.

If the problem persists, check your firewall settings and make sure the firewall is not blocking your Internet connection. Some antivirus programs can block any unknown connection by default to increase security. In this case, you can try restoring the default Windows firewall settings and see if this helps.

Other suggestions here: Fix network and Internet connection problems.



Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Related Video

Scroll to Top