Updated December 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
- Download and install the repair tool here.
- Let it scan your computer.
- The tool will then repair your computer.
In Windows 10/8/7/Vista OS, you can select a network from public or private scenarios to share with devices within range. For the network in public locations, you do not need to share it, while you can allow sharing for devices if your system is limited to your home or private location. These parameters can be managed in the Control Panel under the cover of the Network.
However, if you need to navigate to different locations and change the sharing settings of Network in the short term, there are shortcuts that you can use to easily configure these settings. In this article, we discuss different ways to allow or disallow sharing for the network to which you are connected.
Reading: Difference between public and private network.
Change network status from public to private
Change network status via settings
December 2024 Update:
You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:
- Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
- Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
- Step 3 : Click “Repair All” to fix all issues.
In general, under Windows 10/8/7, you can click on the network icons in the taskbar > Network > Properties and do what you need here.
1 Under Windows 8.1, press the combination Windows + I on the keyboard to display the settings. Now click on the symbol Network below. You can also click the Network icon in the taskbar notification area.
2 In section Networks, right-click the network whose state you want to change and select Enable or disable sharing.
3 Finally, you can choose between Private and Public for your network. When you Yes, enable sharing or connect to devices, the network changes to Status Private.
Use the Group Policy Editor
1 Press the combination of Windows + R and place gpedit.msc in the Run dialog box .
2 Navigate to the left pane :
Computer Configuration -> Windows Settings -> Security Settings -> Network List Manager Policies
3 In the window above, right-click the network whose status you want to change and click Properties. In the window Properties, you can now easily select the network status. Click Apply followed by OK after making your choice.
Change the network status from the command prompt
Open one administrative command prompt and paste the following command and press Enter :
netsh Delete profile name='HomeNetwork'
This command deletes Public can reconnect the network and this time you can select the mode Private at the time of connection. To view the names of all network profiles stored on your system, run netsh show profiles at the command prompt .
I hope you find this advice useful.
Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here
