Author name: Carter Blakefield

Stop Error 0x0000009f is also known as DRIVER_POWER_STATE_FAILURE. This blue screen of death error indicates that the driver is in an incoherent or invalid state of tension.

The most common cause of this error is obsolete driver software for your installed hardware. Another cause is an obsolete BIOS or a recent hardware change.

DRIVER_STATE_POWER_FAILURE is a blue screen error that occurs when the voltage state changes, i.e. when you shut down, restart or hibernate your computer, hibernate, and so on. During this process, all hardware installed on your computer is instructed to change its power state to shutdown, but if there is an error in a particular device driver, the device does not respond as Windows wants, and you will be faced with this STOP error. read more

The VIDEO_TDR_ERROR has a stop error code of 0x0000116, which indicates that an attempt to reset the display driver and restore it after a timeout has failed.

The error 0x0000116 can be caused by damage to Windows system files. Corrupted system file entries can pose a real threat to your computer’s well-being.

There can be many events that have led to errors in system files. Incomplete installation, incomplete uninstallation, incorrect removal of applications or hardware. It can also be caused if your computer is recovered from a virus or adware/spyware attack or an inappropriate computer shutdown. All of the above activation may result in deletion or corruption of Windows system file entries. This corrupted system file leads to missing and incorrectly linked information and files needed for the application to run properly. read more

Many BlueScreens are caused by old or damaged drivers, especially video drivers, but there are other causes. The error message Stop 0x0000000a means that a process or driver has attempted to access a memory area without authorization. It is also known as IRQL_NOT_LESS_OR_EQUAL.

This stop error is output when accessing the reverse (or invalid) memory when the IRQL value is too high. The error that causes this error check usually occurs after a defective device driver, system service, or BIOS has been installed. read more

The VIDEO_MEMORY_MANAGEMENT_INTERNAL also known as Stop Error 0x0000010E indicates that the video memory manager has encountered a condition from which it cannot recover.

This error is known to occur as a result of a damaged or obsolete device driver. Sometimes device drivers are misconfigured, damaged or obsolete. This can also happen after a Windows upgrade or downgrading of Windows from a newer system to an older system. This BSOD error is usually caused by the incorrect behavior of a video driver. read more

The MANUALLY_INITIATED_POWER_BUTTON_HOLD output has the error code value 0x000001c8.

The error is checked if the power switch is pressed for 7 seconds but released 10 seconds before the UEFI is reset.

The long power button bug control is similar to the 0xE2 MANUALLY_INITIATED_CRASH bug control, which is triggered by a combination of keys.

Since error checking takes place at an undefined time, there is no explicit problem indicated by the error checking parameters.

This blue screen of death error is very rare and has some information to guide users. However, here are some general solutions that can help you solve this BSOD problem. read more

Click Start. Enter devmgmt. look for msc in the domain. Click devmgmt in the list of results. Right click the driver. To update the driver, select Update Driver Software. To disable the selected driver, Disable. To remove the selected driver, Uninstall.

If you have recently installed new uninstall software, this software will do it. If you recently installed a new device driver (or if your BSOD information points to a driver or device), uninstall or roll back that driver (unless you really need the device, you can temporarily disable it instead). Restart your computer and see if the BSOD reoccurs.

Download and install the latest drivers for your computer hardware from your computer manufacturer’s website – this may resolve BSOD issues caused by the drivers. Boot Mode: Safe If you see a blue screen every time you turn on your computer, try booting into safe mode. read more

On this page, we will discuss information about the cause and possible solutions of the blue screen of death related to startup (BSOD) with the error “UNMOUNTABLE_BOOT_VOLUME” and the stop code STOP: 0x000000ED. This error is sometimes written incorrectly as UNMOUNTABLE_BOOT_DRIVE, but it is functionally the same.

If you received a blue screen error or a shutdown code, your computer suddenly shut down to protect against data loss. A hardware device, its driver or associated software may cause this error. read more

Or faulty incompatible device drivers can cause a blue screen error. Also, the error may be caused by a conflict between one or more drivers. To get rid of the ATTEMPTED_SWITCH_FROM_DPC stop code in Windows 10/11, you need to make sure all of your devices have the correct drivers installed and update those old drivers.

Remove incompatible software.
Run a memory test.
Check for hard drive errors.
Remove unnecessary devices. malfunction
replacement or incompatibility of expansion cards.
Run SetupDiag after a failed Windows update.
Perform a clean install.

Perform a memory test. A possible cause is faulty storage software.
Run a disk check.
Reinstall device drivers. or
Repair Windows 10.

If you are monitored by ATTEMPTED_SWITCH_FROM_DPC blue screen of death error, you are not alone. Many Windows 10 users also report this problem. As boring as it may sound, it can be fixed. read more

NMI_HARDWARE_FAILURE error has code 0x00000080 This blue death error screen indicates that a hardware malfunction has occurred. A large number of hardware malfunctions can cause the NMI_HARDWARE_FAILURE BSOD error. The exact cause is difficult to determine.

NMI stands for Non-Maskable Interrupt, which is a hardware error that leads to a blue screen error after installing new hardware or software.

Here are some applicable solutions to correct this BSOD error NMI_HARDWARE_FAILURE (Error 0x80).

Disconnect newly connected hardware

This error can be caused by newly installed hardware such as a sound card, graphics card and hard disk. Remove or replace it. Then restart your computer to see if it works. read more

Solution 1 – Use the Blue Screen Troubleshooter Solution 2 – Check for Windows Disk Errors Solution 3 – Run the Memory Diagnostic Tool Solution 4 – Update the Realtek PCIE Wireless LAN PCI-E network card driver Solution 5 – Check the disk answers 6 answer 7 solutions 8

On your keyboard, press and hold the Windows logo key, then press Pause.
Click Device Manager.
Double-click Network adapter.
Right-click the Realtek PCIE Wireless LAN PCI-E network card driver to select Update Driver.
Select Search for automatically updated driver software.

While we are talking about Blue Screen of Death errors, one of them is a system file called rtwlane. system This falls under the category of DRIVER IRQL NOT LESS OR EQUAL stop errors. This indicates that the kernel-mode driver was trying to access paged memory for a process with a high IRQL. read more