Fix Something went wrong with the projection error



Updated November 2024: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link
  1. Download and install the repair tool here.
  2. Let it scan your computer.
  3. The tool will then repair your computer.

Windows 10 was developed with the aim of developing an operating system to increase a user’s productivity. This is why modern Windows 10 computers have the ability to project their wireless displays on an external display. Microsoft has an application – Connect preinstalled and dedicated that helps another device project its screen onto the computer. But this characteristic is very sensitive. It will not work properly if it is not properly configured. And if a configuration does not work properly, an error is displayed – the projection has malfunctioned.

This error is caused by problems with the display driver, hardware errors, corrupted system files and more.

Repair the wireless signal

To correct the projection error, try to minimize interference from other wireless devices such as routers or access points by removing them from the device you want to project onto.

  • Make sure that your Windows device is visible to your projection device.
  • Disconnect your Windows device from the Wi-Fi network.
  • Log in to the screen.
  • Reconnect to your Wi-Fi network.
  • You may need to set your Wi-Fi router to another channel.

Undo all recent changes

If the projection has already worked, and after some software or hardware changes, the function did not work, and the projection error went wrong, there is something you can do about it.

The installation of new software may change the projection configurations.

November 2024 Update:

You can now prevent PC problems by using this tool, such as protecting you against file loss and malware. Additionally, it is a great way to optimize your computer for maximum performance. The program fixes common errors that might occur on Windows systems with ease - no need for hours of troubleshooting when you have the perfect solution at your fingertips:

  • Step 1 : Download PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista – Microsoft Gold Certified).
  • Step 2 : Click “Start Scan” to find Windows registry issues that could be causing PC problems.
  • Step 3 : Click “Repair All” to fix all issues.

Download Now

So you have to cancel all these changes and see if it solves your problems. To do this, uninstall any newly installed software or delete any hardware you have securely installed on your computer. Make sure the hardware you are deleting is on when you turn off your computer.

Resetting firewall settings

Start Firewall Manually

This is not always the case, but sometimes your connection is blocked by the Windows firewall. In some cases, the projection error may cause a problem.

To repair it, go to the Windows Defender Security Center and select Firewall and Network Protection. Then select Restore Default Firewalls.

This should reset all outgoing and incoming rules. Finally, don’t forget to whitelist the device you want to project onto.

Update device drivers

Update-Drivers

The pop-up window appears because the system may not be able to recognize the monitors. I suggest that you update the display drivers, as this could force the system to detect the available monitors. Here are the steps:

  1. Press “Windows + X” and select Device Manager.
  2. Locate the driver and expand the driver icon.
  3. Right-click on the driver icon and click Update.

https://h30434.www3.hp.com/t5/Notebook-Wireless-and-Networking/quot-something-went-wrong-with-the-projection-quot-message/td-p/6106078



Expert Tip: This repair tool scans the repositories and replaces corrupt or missing files if none of these methods have worked. It works well in most cases where the problem is due to system corruption. This tool will also optimize your system to maximize performance. It can be downloaded by Clicking Here

Scroll to Top